HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 155)

Hardware information screens 155
Server Bays Summary screen
Device bay numbering is dependent upon whether the 'Allow the double density device bays' option was
selected while using the Domain Setup Wizard. Bays might be displayed as 'Covered' or 'Unknown.' For
additional information, see "Double-dense server bay option (on page 155)."
The following table describes the columns within the Server Bays Summary screen.
Column Description
Bay Bay number
Status Status of the server blade in the bay
Device Type of server blade installed in the bay
Power Icon indicates whether the server blade is powered on or off
Assigned Profile Name of the server profile assigned to the device bay
Double-dense server bay option
If the 'Allow the double density device bays' option was selected while using the Domain Setup Wizard,
VC Manager displays the server bays as double-dense, regardless of the actual hardware installed.
For example, if a full-height server blade is installed in physical Bay 1 of a double-dense enabled
enclosure, Bay 1A and Bay 1B in VC Manager are displayed as 'Covered.' If a double-dense server