Configuration save/restore menu – HP Modular Cooling System User Manual
Page 37
Web interface 37
To modify a password:
1.
In the Password field, enter the new password.
2.
In the Retype Password field, enter the new password again.
3.
Perform one of the following steps:
o
Click Save Settings to save the updated account information.
o
Click Cancel to undo the changes.
Configuration Save/Restore menu
To access the Configuration Save/Restore screen, in the left navigation frame, click Configurations
Save/Restore. This screen enables the Admin to save and restore a configuration file.
NOTE:
The following screen is the same for either MCS-100 or MCS-200 units.
On the Configuration Save/Restore screen:
•
Click Save Configuration to save the configuration file.
•
Click Restore Configuration to restore the configuration file.
•
Click Undo Changes to undo the changes.
You can save the configuration and then restore the same configuration on multiple management modules.
The IP address must be set individually on each unit through DHCP or the serial interface before the
replication can be performed.
To replicate a configuration to multiple MCS units, save the configuration file: