Logs tab – HP Modular Cooling System User Manual
Page 19
Web interface 19
You can enter or change the system name, system contact, and system location information in the System
You can change the IP address in the Network menu (on page
NOTE:
The following screen is the same for either MCS-100 or MCS-200 units.
Parameter
Value
System Name
Displays information entered in the
Setup>Management>System Information>System Name
field and also on the top of each screen
System Contact
Displays information entered in the
Setup>Management>System Information>System Contact
field
System Location
Displays information entered in the
Setup>Management>System Information>System Location
field
MAC Address
Displays the MAC address
IP Address
Displays information entered in the Setup>Network>IP
Address field
Software Version
Displays the software version
Firmware Version
Displays the firmware version
Hardware Version
Displays the hardware version
Modular Cooling System
Type
Displays the type of the unit
Product ID
Displays the product identification number
Serial number
Displays the product serial number
On the Identification screen, click Refresh to update the screen with current information.
Logs tab
Menu options listed under the Logs tab include:
•
Alarms History menu ("
" on page
•
The Alarms History and Event Log screens display up to 150 of the most recent alarms and events. You can
archive logs by periodically downloading them using FTP after FTP is enabled in the Management>Remote