HP Modular Cooling System User Manual
Page 34
Web interface 34
To enable SSL:
1.
Click the SSL radio button.
2.
Click Save Settings. A new HTTPS URL appears on the operator display.
3.
Log in to the web interface using the new IP address or hostname (using the https://hostname[:port
number] format).
4.
Enter the port number to use HTTPS in the HTTPS Port field.
A default self-signed SSL certificate can be used, or you can enter your own certificate. The default
certificate is used if another certificate is not entered.
You can also enter your own SSL and private keys in the following format:
-----BEGIN CERTIFICATE-----
MIICgj......
.....
......Qorw==
-----END CERTIFICATE-----
-----BEGIN RSA PRIVATE KEY-----
MIICXAIB......
.....
....tFlYw=
-----END RSA PRIVATE KEY-----
5.
Click Save Settings.
6.
Do one of the following:
o
To save the information, click Save Settings.
o
To undo the changes, click Cancel.
To disable SSL:
1.
Select to disable SSL, using the SSL radio button.
2.
Enter the port number to use HTTP in the HTTP Port field.
3.
Do one of the following:
o
To save the information, click Save Settings.
o
To undo the changes, click Cancel.
To configure other remote access settings:
1.
Select to enable or disable FTP, using the FTP radio buttons.