Flow meter/capacity calculation, Transfer switch, Automatic door release kit – HP Modular Cooling System User Manual
Page 26
Web interface 26
Flow Meter/Capacity Calculation
The Flow Meter/Capacity Calculation feature enables flow meter measurements and capacity calculation
shown on the Overview page.
This feature is enabled by default. To disable Flow Meter/Capacity Calculation:
1. Click Setup>Advanced.
2. In the Flow Meter/Capacity Calculation field, select Disable.
Transfer Switch
If you have the transfer switch installed, to enable the transfer switch:
1.
Click Setup>Advanced.
2.
In the Transfer Switch field, select Enable.
For more information, see the HP Modular Cooling System 200/100 Options Installation Guide.
Automatic Door Release Kit
To view the HP Automatic Door Release hardware installation instructions, see the HP Modular Cooling
System Rack Options Installation Guide.
To enable the automatic door release:
1.
Click Setup>Advanced.
2.
In the Emergency Door Opening field, select Enable.
When the function has been enabled, an indicator appears on the Home tab showing the current status of the
rack doors. Also, a new button appears on the Advanced tab, enabling you to test the feature.