Alarm history menu – HP Modular Cooling System User Manual
Page 20
Web interface 20
). The alarm.history and event.log files are located in the download directory. Every
file uploaded and downloaded using FTP is recorded in the FTP.log, which is also located in the download
directory. To enable FTP, see the "Remote Access tab (on page
)." To view FTP Admin and FTP User
privileges and assign passwords to open each account, see the "Accounts menu (on page
)."
Alarm History menu
To display the Alarm History screen, in the left navigation frame, click Alarm History. The alarms are listed
by the date and time at which the alarm event most recently occurred.
The following information is displayed for each alarm:
•
Severity—An icon indicating the severity or status of the alarm (Critical, Warning, Normal, Unknown,
or Information).
•
Status—The status of the alarm, either Active or Cleared.
•
Description of Alarm—The name of the alarm (For more information on the alarm description, see
"Warning and alarm messages (on page
).")
•
Date/Time—The date and time at which the alarm occurred.
NOTE:
The following screen is the same for either MCS-100 or MCS-200 units.
NOTE:
Under the Description of Alarm column, temperatures that display "--" in the logs are out
of range.
You can save or clear the log files, or update the screen, using the following buttons at the bottom right side
of the screen:
•
(Admin only) To save the log files, click Save Alarm History. This function saves all the log files to the
remote work station.
•
(Admin only) To clear the log files, click Clear Alarm History. This function clears all the log files, and
you cannot recover the data after it is cleared.