HP XP Array Manager Software - Manual (Page 53)

Figure 28 The Delete Authentication Information Dialog Box
Registering Host Group User Information
To perform mutual authentication, you need to specify user information for host groups on the ports of the
storage system. Specify unique user information for each host group. You can change the specified user
information for host groups the same way you specified them initially.
To specify user information for a host group:
1. Make sure that Remote Web Console is in Modify mode.
2. Start LUN Manager and display the Authentication window ( Figure 14 on page 31).
3. In the Port tree, select a port or host group whose user information you want to specify.
The currently registered user information for the selected port or host group appears in the
Authentication Information (Target) list.
4. Right-click any point in the Authentication Information (Target) list and select Specify
Authentication information from the pop-up menu.
The Specify Authentication Information dialog box ( Figure 29 on page 54) appears. In this
dialog box, specify the following user information for the port or host group selected in the
Port tree.
• Port Name
The port name of the selected port appears. You cannot change the port name.
• User Name
Specify the user name of the host group in up to 16 characters. You can use alphanumeric
characters. User names are case-sensitive.
• Secret
Specify the secret (that is, a password used in CHAP authentication) in 12 to 32 characters.
You can use alphanumeric characters, spaces, and the following symbols in a user name:
. - + @ _ = : / [ ] , ~
• Re-enter Secret
Specify the secret again for confirmation.
5. Click the OK button to close the Specify Authentication Information dialog box.
The specified user information for the port appears in blue in the Authentication Information
(Target) list of the Authentication window.
6. Click the Apply button in the Authentication window.
A message appears and asks if you want to apply the setting to the storage system.
7. Click the OK button to close the message.
The setting is applied to the storage system.
XP24000 LUN Manager User's Guide 53