HP XP Array Manager Software - Manual (Page 30)

Port Information List
Port Name
Displays Fibre Channel port names. For details, see Table 7 on page 69
through Table 8 on page 73.
Time out
Displays period of time between authentication sessions to a same port. If
the previous authentication session to a port failed, the next authentication
session starts after the specified period of time elapses. The unit is
seconds.
Refusal Intvl.
If authentication fails for the number of times specified in Refusal Freq.,
connection to the port fails. Refusal Intvl. displays the interval from when
connection to a port fails to when the next authentication session starts.
The unit is minutes.
Refusal Freq.
Displays the number of times of authentication allowable for connection
to a port. If authentication fails for the displayed number of times,
connection to the port fails.
FC Switch Information List
Port Name
Displays Fibre Channel port names. For details, see Table 8 on page 73
through Table 8 on page 73.
User Name Displays user names of Fibre Channel switches.
Mode
Displays mode of authentication between ports and Fibre Channel
switches. If the authentication mode is mutual, bi-directional
appears. If the authentication mode is not mutual, unidirectional
appears.
Displays whether to perform authentication for the Fibre Channel switch.
Authentication
If the Fibre Channel switch is a target of user authentication, Enable
appears. If the host is not a target of user authentication, Disable
appears.
Authentication Window, Fibre Port Selected
When you launch LUN Manager and click the Authentication tab, the Authentication window appears.
This window lets you make settings for user authentication.
Note : The storage partition administrators can display information or perform the operation within only
the allocated SLPR. For the details on SLPRs, see HP StorageWorks XP24000 Disk/Cache Partition
User’s Guide.
30 Using the LUN Manager GUI