HP XP Array Manager Software - Manual (Page 24)

• The Add WWN button registers host bus adapters in a host group. Before using this button,
you must select a host group in the LU Path tree and also select host bus adapters (WWNs) in
the WWN list.
• The Add LU Path button defines LU paths to logical volumes. Before using this button, you must
select LUNs in the LU Path list and also select logical volumes in the LDEV list.
The WWN List
In the lower left of the LUN Manager window is a list named WWN. The WWN list appears when you
select an item related to a Fibre Channel port from the tree.
Figure 7 The WWN List
The WWN list displays host bus adapters that are connected to Fibre Channel ports of the storage system.
Displays a list of ports.
Port
The Fibre address of a port appears to the right of the port name.
Displays host groups, which are used to classify server hosts connected to the
Host Group
storage system. For more information, see “ Creating Host Groups ” on page 37.
Name
Indicates nicknames of host bus adapters. For more information about
specifying nicknames, see “ Registering Hosts in Host Groups ” on page 39.
WWN Indicates worldwide names of host bus adapters.
LDEV List
The LDEV table Lists logical volumes in the storage system.
24 Using the LUN Manager GUI