HP XP20000XP24000 Disk Array - Manual (Page 83)

4 Performing Remote Web Console
Operations
Enabling and Disabling Remote Web Console Options
To activate the program product options of the storage system on Remote Web Console, the program
product options need to be installed using license keys. This section describes the program product
options on Remote Web Console, and the procedures for installing and uninstalling the program product
options from the License Key window (see “ License Key Window ” on page 50).
Only storage administrators can install and uninstall the program product options.
Note: If storage partition administrators want to use the program product options for their own SLPRs,
storage administrators have to install the program product options using the License Key window, and
then allocate the licensed capacity for each program product option to SLPRs using the License Key
Partition Definition window. For a description of the License Key Partition Definition window and the
procedure of allocating licensed capacity to the SLPRs, see the HP StorageWorks XP24000 Disk/Cache
Partition User’s Guide.
Enabling Options Using a License Key Code
To enable a Remote Web Console option by using the license key code:
1. Log in to the Remote Web Console and open the License Key window
(“ License Key Window ” on page 50).
2. Change to Modify mode (see “ Changing Between View Mode and Modify Mode ” on page 40
if you need instructions).
3. Select Key Code in Mode.
4. In Key Code, enter the license key code.
Note: You cannot copy and paste text from other applications.
5. Click Install.
The row of the installed option changes to blue bold italics and the Status column changes
to Install .
Important: To implement the setting, you must click Apply.
Note : To disable the term key, perform the operations that are described in
“ Enabling or Disabling a License ” on page 85.
6. When you want to enable other options, repeat steps 3 through 5 .
7. Click Apply (or Cancel).
The status of the enabled options changes to Installed.
Note: The warning messages are displayed in the following cases:
• The error code # 405 5503 is displayed if you install an emergency key for an option that
has already been installed with a permanent key.
If you install the emergency key, it expires in 30 days.
• The error code #405 5501 is displayed if you install an emergency key when the option
has already been installed with a temporary key and the remaining lifetime of the option is
more than 30 days.
You cannot install an emergency key under these circumstances.
For details on these error codes, see the HP StorageWorks XP24000 Remote Web Console
Error Codes.
XP24000 Remote Web Console User’s Guide 83