HP XP20000XP24000 Disk Array - Manual (Page 59)

Figure 25 The Port Status Window
Cluster-1 and Cluster-2 in the Port Status window indicate the clusters. The ports of Cluster-1 are listed on
the upper part, and the ports of Cluster-2 are listed on the lower part of the Port Status window.
Each cluster has 16 PCBs (Printed Circuit Board) and the name of each PCB is displayed on the header of
the port list. The icons show the port name, port LED status, and equipment information for the port. The
icons displayed indicate the following information:
• : This port is equipped and currently used. The cable is properly set. This port is available
for the operation.
• : This port is equipped and available for the operation.
• : This port is not equipped or not available.
Alerts Window
The Alerts window displays the internal statuses (according to the SIM information reported to the host)
of the connected storage system. The storage system generates a service information message (SIM)
whenever it detects an error or service requirement.
The status history is listed in the Status list on the Alerts window.
To open the Alerts window, log in to the Remote Web Console, and then click Go, System Information
and Status on the menu bar of the Remote Web Console main window.
Note: Storage partition administrators cannot display the Alerts window.
XP24000 Remote Web Console User’s Guide 59