HP XP20000XP24000 Disk Array - Manual (Page 52)

• Option name
• Icon that indicates whether the option is available ( indicates Installed;
indicates Not
Installed)
• The Key Type column shows the license type: Permanent, Term, Temporary or Emergency. When
no license key is installed, Not Installed is displayed.
• The Permitted Volumes column shows the following information: XXTB(YYTB)
• XX: available capacity (licensed capacity)
• YY: capacity that is already being used by the Continuous Access, Business Copy, Volume
Retention Manager, and HP StorageWorks XP Data Retention Utility.
For example, if this column displays 10.0TB(2.50TB), the licensed capacity is 10.0 TB and the
capacity already being used is 2.50 TB.
If the size is unlimited, Unlimited is displayed in this column.
Licensed capacities are calculated assuming that 1 kB = 1,024 bytes, 1 MB = 1,024 kB, 1 GB =
1,024 MB, and 1 TB = 1,024 GB.
• The Term (days) column shows the number of days that remain before the expiration of a
temporary key, an emergency key, or a term key. After the temporary key has expired, the number
of days that remain before you can re-install the temporary key is displayed.
• The Status column shows the current status of an option:
• Installed: The option is available. The Product Name column displays the Installed icon ( ).
• Installed (Disable): Installation is complete, but the license is set to disable. The Product Name
column displays the Not Installed icon ( ).
Note : This status might be displayed if an error occurs after you install options with the
permanent key. Resolve the error and enable the license.
• Not Installed: The option is not available. The Product Name column displays the Not
Installed icon ( ).
• Not Enough: Installation is complete, but the volume capacity is insufficient. The Product
Name column displays the Not Installed icon (
• Capacity Insufficient: The licensed capacity is insufficient because hard disk drives are added.
The license expires in 30 days. The Product Name column displays the Installed icon ( ).
Purchase the enough license before the license key expires.
• Time Out: The term has already expired for the temporary key. The Product Name column
displays the Not Installed icon ( ). When the status is Time Out, you cannot re-install the
temporary key.
The following table explains the icons shown on the License Key window.
).
52 Using the Remote Web Console GUI