Canon XF305 - Manual (Page 198)

Additional Information
198
8
Troubleshooting
Shot Mark Error
- Could not add a shot mark. If the message appears in mode, try adding the mark again. If that does not work,
add the mark in mode after you finish recording. If the message appears in mode, turn off the camcorder
and then back on. Then, try to add the mark again.
System error
- Turn off the camcorder and back on again. If this does not solve the problem, there may be a malfunction with the
camcorder. Consult a Canon Service Center.
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or edited on a computer.
Z Mark Error
- Could not add a Z mark. If the message appears in mode, try adding the mark again. If that does not work, add
the mark in mode. If the message appears in mode, turn off the camcorder and then back on. Then, try to
add the mark again.
e Mark Error
- Could not add an e mark. If the message appears in mode, try adding the mark again. If that does not work, add
the mark in mode. If the message appears in mode, turn off the camcorder and then back on. Then, try to
add the mark again.
COP
Y