Canon XF305 - Manual (Page 130)

Customization
130
4
Custom Picture Settings
Other Functions
[Setup Level]: Adjusts the black level set by the [Black] and [Master
Pedestal] settings.
[Level]: Determines the amount of adjustment to be made. This setting
can be adjusted from -50 to 50. (Default: 0)
[Press]: Compresses the dynamic range of the video signal so that it
does not exceed 100%. Available options are [On] and [Off].
(Default: [Off])
[Clip At 100%]: When the video signal exceeds 100%, this function clips
the white level at 100%. (Default: [Off])
NOTES
• When an optional RC-V100 Remote Controller is connected to the
camcorder, the following custom picture settings can be changed using
the buttons and dials on the remote controller. They cannot be
changed from the camcorder while the RC-V100 is connected.
- [Black]
[Master Pedestal], [Black] [Master Black]
[Red], [Blue]
- [Black Gamma] [Level]
- [Knee] [Slope] and [Point] (only when [Knee] [Enable] is set to
[On])
- [Sharpness] [Level]
- [White Balance] [R Gain], [B Gain]
COP
Y