beautypg.com

Using the av or video 2 terminal, External monitor 155, Cop y – Canon XF305 User Manual

Page 155

background image

155

External Connections

6

Connecting to an External Monitor

NOTES

• If necessary, you can superimpose the onscreen displays on the video

displayed on the external monitor (0 155).

Using the AV or VIDEO 2 Terminal

When you output video from the AV terminal or VIDEO 2 terminal, the
video signal is converted to an analog SD composite video signal. While
the VIDEO 2 terminal outputs only video, the AV terminal also outputs
audio. You can select the SD output method (0 152).

NOTES

• If necessary, you can superimpose the onscreen displays on the video

displayed on the external monitor (0 155).

• When you play back a clip on a monitor with a 4:3 aspect ratio, the

monitor will switch automatically to widescreen mode if it is compatible
with the Video ID-1 system.

Superimposing Onscreen Displays to Appear on an
External Monitor

You can choose to superimpose onscreen displays on the video output
from the HD/SD SDI terminal (b only), HDMI OUT terminal, HD/SD
COMPONENT OUT terminal, AV terminal or VIDEO 2 terminal. Doing so
will display the onscreen displays on an external monitor. You must set
this function separately for HD and SD output. This setting will not affect
your recordings.

1 Open the [HD Onscreen Disp.] or [SD Onscreen Disp.] submenu.

[N Video Setup]

[HD Onscreen Disp.] or [SD Onscreen Disp.]

2 Select [On] and then press SET.

• G appears on the right side of the screen (when [M LCD/VF

Setup]

[Custom Display]

[Output Display] is set to [On]).

NOTES

• Onscreen displays will not appear on an external monitor for SD output

if [N Video Setup]

[SD Output] is set to [Side Crop].

[N Video Setup]

[HD Onscreen Disp.]

[SD Onscreen Disp.]

[Off]

COP

Y

This manual is related to the following products: