Canon XF305 - Manual (Page 128)

Customization
128
4
Custom Picture Settings
[Y Level]: Adjusts the brightness for detection of skin tones. This
setting can be adjusted from 0 to 31. (Default: 16)
Selective Noise Reduction
The camcorder detects the characteristics of a certain color or tone and
applies a noise reduction filter to the targeted areas. A zebra pattern will
appear over targeted areas on the screen.
[Effect Level]: Adjusts the level of the noise reduction filter. The available
options are [Off], [Low], [Middle] and [High]. (Default: [Off])
[Hue]: Adjusts the hue for the color to be detected. This setting
can be adjusted from 0 to 31. (Default: 0)
[Chroma]: Adjusts the color saturation for the color to be detected.
This setting can be adjusted from 0 to 31. (Default: 16)
[Area]: Adjusts the color range for the color to be detected. This
setting can be adjusted from 0 to 31. (Default: 16)
[Y Level]: Adjusts the brightness for the color to be detected. This
setting can be adjusted from 0 to 31. (Default: 16)
Color Matrix
Color matrix affects the color tones throughout the whole image.
[Select]: Available options are [Normal 1] to [Normal 4], [Cine 1] and
[Cine 2]. Generally, this is the same setting as [Gamma]. After
selecting an option, you can make more precise adjustments.
(Default: [Normal 1])
[Gain]: Adjusts the color intensity. This setting can be adjusted from
-50 to 50. (Default: 0)
[Phase]: Adjusts the color phase. This setting can be adjusted from
-18 to 18. (Default: 0)
[R-G]: The R-G matrix changes the tint of the picture along the cyan/
green and red/magenta gradations. This setting can be adjusted
from -50 to 50. (Default: 0)
[R-B]: The R-B matrix changes the tint of the picture along the cyan/
blue and red/yellow gradations. This setting can be adjusted
from -50 to 50. (Default: 0)
[G-R]: The G-R matrix changes the tint of the picture along the
magenta/red and green/cyan gradations. This setting can be
adjusted from -50 to 50. (Default: 0)
[G-B]: The G-B matrix changes the tint of the picture along the
magenta/blue and green/yellow gradations. This setting can be
adjusted from -50 to 50. (Default: 0)
[B-R]: The B-R matrix changes the tint of the picture along the yellow/
red and blue/cyan gradations. This setting can be adjusted from
-50 to 50. (Default: 0)
[B-G]: The B-G matrix changes the tint of the picture along the yellow/
green and blue/magenta gradations. This setting can be
adjusted from -50 to 50. (Default: 0)
COP
Y