Canon XF305 - Manual (Page 145)

145
Playback 5
Clip Operations
Copying All Clips
1 Open the [Copy All Clips] submenu.
[J Other Functions] [Clips] [Copy All Clips]
2 Select [OK] and then press SET.
• All of the clips on the selected CF card will be copied to the other CF
card.
• Select [Cancel] instead to cancel the operation.
• While the clips are being copied, you can press SET to cancel.
3 When the confirmation message appears, press SET.
Copying All Clips with an e Mark
1 Open the [Copy e Clips] submenu.
[J Other Functions] [Clips] [Copy e Clips]
2 Select [OK] and then press SET.
• All of the clips with an e mark on the selected CF card will be
copied to the other CF card.
• Select [Cancel] instead to cancel the operation.
• While the clips are being copied, you can press SET to cancel.
3 When the confirmation message appears, press SET.
IMPORTANT
• Observe the following precautions while the CFj or CFl access
indicator is illuminated in red. Failure to do so may result in permanent
data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the cover of the either CF card slot.
NOTES
• You cannot copy a clip if either CF card slot cover is open.
• If a clip is being copied to a card that already has a clip with the same
number (the 4-digit number in the clip name), then the copied clip will
be renamed with the following number.
[J Other Functions]
[Clips]
[Copy All Clips]
[J Other Functions]
[Clips]
[Copy e Clips]
COP
Y