Canon XF305 - Manual (Page 184)

Additional Information
184
8
Menu Options
1
Not available in the [Photos] index screen.
2 Setting options for [Assign Button]: [(NONE)], [Standard IS], [Dynamic IS], [Powered IS], [Focus Limit], [Face AF], [Select Face],
[Backlight], [Spotlight], [Tele-converter], [Peaking], [Zebra], [WFM (LCD)], [Magnification], [Color Bars], [Markers], [LCD Setup], [LCD/
VF B&W], [Onscreen Display], [Add Shot Mark 1], [Add Shot Mark 2], [Add e Mark], [Add Z Mark], [Time Code], [Time Code
Hold], [Audio Output CH], [Audio Level], [Wireless Controller], [Photo], [Rec Review], [Delete Last Clip].
The default settings are as follows. [1]: [Standard IS], [2]: [Peaking], [3]: [Zebra], [4]: [WFM (LCD)], [5]: [Rec Review], [6]:
[Magnification], [7]: [Magnification], [8] to [13]: [(NONE)].
3
[12], [15], [18], [20], [21], [22], [24], [25], [26], [27], [28], [30]
When [Bit Rate/Resolution] is set to [50 Mbps 1280x720] or [35 Mbps 1280x720], you can also select:
[32], [34], [36], [40], [44], [48], [54], [60]
4
Available in the clip index screen only.
5
Available in the clip index screen and [e Mark] index screen only.
6 Available in the [Photos] index screen only.
[Reset All Settings]: Resets all the camcorder’s settings to default values.
[Tally Lamp]: Allows you to set whether the front and rear tally lamps illuminate while the camcorder is recording.
[Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicator
illuminates while the camcorder is accessing a CF card or SD card.
[Genlock Adjust.]: The phase difference between the external Genlock signal and the camcorder is initially set to
0. This function allows you to adjust it within the range of approx. ±0.4 H (-1023 to 1023). When setting to 1000 or
more or -1000 or less, set the first field to -10.
[Title Prefix]: Determines the first 2 letters of the clip name. Combined with the [Number Setting] setting, this
constitutes the 6-character clip name.
[Number Setting]: Determines the last 4 digits of the clip name. Combined with the [Title Prefix] setting, this
constitutes the 6-character clip name. Select [Set] to assign a desired number to the first clip you record or select
[Reset] to reset the number to [0001].
The numerals increase every time a clip is recorded.
[Delete Last Clip]: Deletes the last clip you recorded. This setting option will not appear if you turned the
camcorder off since recording the last clip.
[Country Code]: This identifier is the country code defined by ISO-3166-1 and is to be entered starting from the
left.
[Organization]: This identifier represents the organization that owns or operates the camcorder and can be
obtained by registering with the SMPTE Registration Authority. If the organization is not registered, enter [0000].
[User Code]: This identifier designates the user. Leave this blank if [Organization] is set to [0000].
[SDI Rec Command]: When you connect the camcorder to another device using the HD/SD SDI terminal, if you
start or stop recording with the camcorder, the other device will also start or stop recording.
[Delete All Photos]: Deletes all the photos recorded on the SD card.
[Reset Hour Meter]: The camcorder has two “hour meters” – the first keeps track of total operation time and the
second keeps track of operation time since the last time the second hour meter was reset with this function.
[GPS Auto Time]: Determines whether the camcorder's date and time will be adjusted automatically according to
the UTC (coordinated universal time) data received from the GPS signal while an optional GP-E2 GPS Receiver is
attached to the camcorder. For details, refer to the instruction manual of the GP-E2.
[Firmware]: You can verify the current version of the camcorder’s firmware. This menu option is usually unavailable.
COP
Y