Canon PowerShot G16 - Manual (Page 92)

92
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Still Images
Specific Shutter Speeds ([Tv] Mode)
Set your preferred shutter speed before shooting as follows. The camera
automatically adjusts the aperture value to suit your shutter speed.
For details on available shutter speeds, see “Shutter Speed” ( = 206 ).
1 Enter [M] mode.
z z Set the mode dial to [ M].
2 Set the shutter speed.
z z Turn the < z> dial to set the shutter
speed.
Shutter Speed (sec.) Available ISO Speed ( = 70 )
15 – 1.3 AUTO, 80 – 3200
1 – 1/4000 AUTO, 80 – 12800
• With shutter speeds of 1.3 seconds or slower, there will be a delay
before you can shoot again, as images are processed to remove
noise.
• When shooting at low shutter speeds on a tripod, you should set [IS
Mode] to [Off] ( = 89 ).
• Maximum shutter speed with the flash is 1/2000 second. If you
specify a faster speed, the camera will automatically reset the speed
to 1/2000 second before shooting.
• Orange display of aperture values when you press the shutter
button halfway indicates that the settings deviate from standard
exposure. Adjust the shutter speed until the aperture value is
displayed in white, or use safety shift ( = 93 ).
• Images shot at high ISO speeds may look grainy.
• [ M]: Time value
• You can customize camera operation so that turning the < 7> dial changes the
shutter speed ( = 96 ).