Canon PowerShot G16 - Manual (Page 12)

12
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
z z Attach the included strap to the camera
as shown.
z z On the other side of the camera, attach
the strap the same way.
Holding the Camera
z z Place the strap around your neck.
z z When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1 Insert the battery pack.
z z Remove the cover from the battery, align
the  marks on the battery and charger,
and insert the battery by pushing it in ( )
and down ( ).
2 Charge the battery pack.
z z CB-2LC: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z z CB-2LCE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
z z The charging lamp turns orange and
charging begins.
z z When charging is finished, the lamp turns
green.
3 Remove the battery pack.
z z After unplugging the battery charger,
remove the battery pack by pushing it in
( ) and up ( ).
CB-2LC
CB-2LCE