On-screen messages – Canon PowerShot G16 User Manual
Page 188
188
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cannot send images.
•
The destination device has insufficient storage space. Increase the storage space on
the destination device and resend the images.
•
The write-protect tab of the memory card in the destination camera is set to the
locked position. Slide the write-protect tab to the unlocked position.
•
RAW images cannot be sent. In [
] mode, only the JPEG images are sent.
•
Images cannot be sent to CANON iMAGE GATEWAY or other Web services if you
move or rename image files or folders on the computer that received images sent
using Image Sync via an access point (
). Before moving or renaming these
image files or folders on the computer, make sure the images have already been sent
to CANON iMAGE GATEWAY or other Web services.
Cannot resize images for sending.
•
Images cannot be resized to be bigger than the resolution setting of their original size.
•
Movies cannot be resized.
Images take a long time to send./The wireless connection is disrupted.
•
Multiple images may take a long time to send. Try resizing the image to [
] or [
]
to reduce sending time (
).
•
Movies may take a long time to send.
•
Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note
that images may take a long time to send even when [
] is displayed.
•
Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
•
When sending images to a computer from a memory card with a large amount
of images (approximately 1,000), the connection may be disrupted. Import any
necessary images to a computer, and then reduce the number of images on the
memory card by erasing unnecessary images.
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
•
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
•
The memory card may be inserted facing the wrong way. Reinsert the memory card
).
Memory card locked
•
The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (
).
Cannot record!
•
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (
Memory card error (
•
If the same error message is displayed even after you have formatted a supported
) and have inserted it facing the correct way (
a Canon Customer Support Help Desk.
Insufficient space on card
•
There is not enough free space on the memory card to shoot (
,
or edit images (
). Either erase unneeded images (
) or insert a
memory card with enough free space (
Charge the battery (
No Image.
•
The memory card does not contain any images that can be displayed.
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV
•
Unsupported or corrupt images cannot be displayed.
•
It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.