Brother FAX-T94 - Manual (Page 92)

6 - 22 SETUP SEND
Changing the TX Lock System Password
1
Press Menu/Set , 0 , 1 .
2
Press or to choose
SET PASSWORD .
3
Press Menu/Set .
The screen prompts you to enter the
old password.
4
Enter the current password.
5
Press Menu/Set .
The screen prompts you to enter the
old password.
6
Enter a 4-digit number as a new password.
7
Press Menu/Set .
The screen prompts you to re-enter
the new password.
8
Enter the new password again and press Menu/Set .
9
Press Stop/Exit .
Switching TX Lock System ON
1
Press Menu/Set , 0 , 1 .
2
Press or to choose
SET TX LOCK .
3
Press Menu/Set . The screen
prompts you to enter the password.
4
Enter a 4-digit password, followed
by
Menu/Set .
This is the same as the security password of your machine
already stored.
The screen displays ACCEPTED for 2 seconds, followed by
TX LOCK MODE - TX Lock System is now switched ON.
If the password you enter at Step 4 is incorrect, the screen
would display
WRONG PASSWORD . After 2 seconds the display
will then return to select menu for Function 0. You must then
start from Step 1 to set TX Lock System.
SET TX LOCK
SET PASSWORD
OLD PASSWD:----
ENTER & SET
NEW PASSWD:----
ENTER & SET
VERIFY:----
ENTER & SET
SET TX LOCK
SET PASSWORD
PASSWORD:----
ENTER & SET