Brother FAX-T94 - Manual (Page 74)

6 - 4 SETUP SEND
Manual transmission
Manual transmission lets you hear the dialling, ringing and
fax-receiving tones while sending a fax.
1
Insert the document face down in the ADF.
2
Pick up the handset and listen for a dial tone.
—OR—
Press Speaker Phone (for FAX-T96 only) and listen for a dial
tone.
3
Enter the fax number you want to call. (You can enter the digits
using the dial pad, or you can enter a One-Touch or Speed-Dial
number, or you can call using
Search/Mute .)
(See One-Touch Dialling on page 7-7.)
4
When you hear the fax tone,
press
Fax Start .
5
If you’re using the handset, hang up.
Sending a fax at the end of a conversation
At the end of a conversation you can send a fax to the other party
before you both hang up.
1
Ask the other party to wait for fax tones (beeps) and then press
Start before hanging up.
2
Insert the document face down in the ADF.
Press Fax Start .
The LCD shows:
3
Replace the handset.
SEND
SEND