Brother FAX-T94 - Manual (Page 123)

MESSAGE MANAGER 9 - 14
Remote Retrieval
You can call your machine from any touch tone phone (or remote
Group 3 fax machine set for tone) and use a Remote Access Code
and Remote Control Commands to retrieve voice (and fax)
messages. You can also program and change some settings for your
Message Manager.
Using the Remote Access Code
1
Dial your machine phone number from a touch tone phone.
2
When your machine answers and beeps, immediately enter
your Remote Access Code.
3
The machine signals the kinds of messages received:
1 long beep—Fax message(s)
2 long beeps—Voice message(s)
3 long beeps—Fax and Voice message(s)
No beeps—no messages
4
The machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a
command, the machine hangs up. If you enter an invalid
command, the machine beeps three times.
5
Press 9 0 to reset the machine when you finish.
6
Hang up.