Brother FAX-T94 - Manual (Page 70)

5 - 22 SETUP RECEIVE
BT Call Sign (For U.K. Only)
This machine feature lets you use the BT Call Sign subscriber
service which allows you to have at least two separate telephone
numbers on one phone line. Each phone number has its own
distinctive ringing pattern, so you know which phone number is
ringing. This is one way you can have a separate phone number for
your machine.
Your machine has a BT Call Sign compatible distinctive ringing
function, allowing you to dedicate a second phone number (on the
same phone line) just for receiving faxes.
To enable the machine to work with BT Call Sign
(Only with your external phone)
1
Press Menu/Set , 0 , 3 .
The screen displays the current setting of this feature.
2
Press or to select ON (or OFF ).
3
Press Menu/Set .
4
Press Stop/Exit .
You can switch it off temporarily, then turn it back on. When you
get a new fax number, make sure you reset this function.
When you set the BT Call Sign feature to ON, the receive mode
is set to
MANUAL automatically. You cannot change the receive
mode to the other mode while the BT Call Sign is set to on.
(If you are using FAX-T96 and set TAD mode, the receive mode
is not set to
MANUAL .)
If you turn off the BT Call Sign, receive mode stays MANUAL .
You need to set receive mode again.