Brother FAX-T94 - Manual (Page 76)

6 - 6 SETUP SEND
Fax resolution
When you have a document in the ADF you can use the Resolution
key to change the setting temporarily (for this fax only). Press
Resolution repeatedly until the LCD shows the setting you want.
Multiple Resolution Transmission
Use this feature to select separate resolution settings for each page
of the fax you are sending. This could be useful if you are sending a
fax with photos and letters, or some pages with small print and others
with normal print. Resolution settings return to
STANDARD after the
fax is sent.
1
Insert the document face down in the ADF, then press
Menu/Set , 3 , 4 .
2
Use or to select resolution for page 1, and press
Menu/Set .
3
Repeat Step 2 for subsequent
pages. Press
Stop/Exit when you
are finished. The screen displays:
STANDARD Suitable for most typed documents.
FINE Good for small print and transmits a little
slower than Standard resolution.
S.FINE Good for small print or artwork and transmits
slower than Fine resolution.
PHOTO Use when the document has varying shades
of gray. This has the slowest transmission
time.
ACCEPTED
NEXT
1.YES 2.NO