Brother FAX-T94 - Manual (Page 73)

SETUP SEND 6 - 3
How to fax
Automatic transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset or press Speaker Phone
(for FAX-T96 only).
1
Insert the document face down, top edge first in the ADF.
2
Adjust the paper guides to fit the width of your document.
3
Enter the fax number using One-Touch, Speed-Dial, Search or
the dial pad.
(See One-Touch dialling, Speed-dialling and Search, pages 6-1
to 6-2.)
4
Press Fax Start .
The ADF can hold up to 10 pages, feeding each one individually
through the fax machine. Use standard 64 g/m
2 ~ 90 g/m 2 paper
when using the ADF; if you are using heavier paper, feed each
sheet individually to prevent paper jams.
Press Resolution (before you send the fax) to select the
resolution for the document you are sending. If you wish to send
in
STANDARD resolution, i.e. a general fax with no graphics, then
the default is STANDARD , and the resolution button need not be
pressed. (See Fax resolution on page 6-6.)
Paper Guides