Brother FAX-T94 - Manual (Page 131)

PRINTING REPORTS 10 - 3
Printing reports
You can print the following lists and reports:
To print a report
1
Make sure that there is no document in the ADF.
2
Press Copy/Reports , then enter the number (see list above)
of the report you want to print. For example, press 6 to print the
USER SETTINGS .
3
Press Stop/Exit .
Lists basic operational steps and menu selections.
Lists names and numbers stored in One-Touch
and Speed-Dial memory, in numerical order.
Journal lists information about the last 30
incoming and outgoing faxes. TX means Transmit;
RX means Receive.
Prints a Transmission Verification Report for your
last transmission.
This information will remain until you pick up the
handset or press Speaker Phone (for FAX-T96
only).
Lists names and numbers stored in One-Touch
and Speed-Dial memory, in alphabetical order.
Lists settings for INITIAL SETUP, SETUP
RECEIVE
, SETUP SEND, REPORT SETTING,
REMOTE FAX OPT (for FAX-T94 only) and
MISCELLANEOUS .
Lists summary information and amount of
occupied memory.
1.HELP LIST
2.QUICK-DIAL
3.FAX JOURNAL
4.XMIT VERIFY
5.TEL.INDEX
6.USER SETTINGS
7.MEMORY STATUS