Brother FAX-T94 - Manual (Page 113)

MESSAGE MANAGER 9 - 4
Recording the Message Manager’s Outgoing
Message (TAD MESSAGE)
Recording the Message Manager’s Outgoing Message (TAD
MESSAGE) is the second step you need to follow before you can
turn on the Message Manager. Make sure your OGM (Outgoing
Message) is less than 20 seconds long.
1
Press Menu/Set , 8 , 3 . The screen prompts you to choose an
OGM.
2
Press or to reach TAD MESSAGE .
3
Press Menu/Set .
4
Press or to select RECORD MSG .
Press Menu/Set .
5
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a
fax, please press
5 1, wait for the fax tones, then press the
start button on your machine.
6
Press Stop/Exit and replace the handset. The Message
Manager plays your OGM.
7
Press Stop/Exit .
Listening to the Outgoing Message (OGM)
1
Press Menu/Set , 8 , 3 .
2
Press or to select TAD MESSAGE (or F/T MESSAGE or
PAGING MSG. ).
Press Menu/Set when the screen displays your selection.
3
Press or to select PLAY MSG and press Menu/Set .
Adjust volume by pressing or .
4
Press Stop/Exit .
This is the only setting you can select if you want to turn the
Message Manager on.