Brother FAX-T94 - Manual (Page 66)

5 - 18 SETUP RECEIVE
The Caller ID is Stored in Your Machine’s Memory
The machine can store a maximum of the last 30 incoming caller IDs
in the memory, along with the time and date of reception. The 31st
call will cause the oldest ID to be erased.
The Caller ID information stored in the memory can be used for the
following.
■
Selecting a Caller ID from the Memory for Call Reply.
You can scroll through the Caller IDs on the display and select
one for your machine to dial. (See below)
■
Printing the Caller ID List.
You can review calls you received by checking the Caller IDs in
memory. This report will list the Date, Time, Phone Number
(Caller ID), and type of call (Comment).
Please set up the number of rings to more than 02 in the Ring
Delay (see Setting the Ring Delay on page 5-4) before you use
the Caller ID. If you set up the number of rings to 01, you cannot
receive the Caller ID.