Brother FAX-T94 - Manual (Page 164)

ACCESSORY LIST A - 1
Accessory List
*For optimum print quality and product performance within published
specifications, use only the correct Brother replacement ribbon.
Model Name Description
PC-70 Printing Cartridge (1 set per box)
PC-71RF 1 re-fill for use in PC-70 Printing Cartridge
PC-72RF 2 re-fills for use in PC-70 Printing Cartridge
PC-74RF 4 re-fills for use in PC-70 Printing Cartridge
Change Answer Mode
Press 9 8.
then for TAD
, press 1.
FAX/TEL , press 2.
FAX ONLY , press 3.
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1 Press Menu/Set, 8, 3.
2 Enter a three- digit number. The cannnot be changed.
3 Press Menu/Set.
4 Press Stop/Exit.
Using Remote Access Code
1 Dial your machine phone number from a touch tone
phone.
2 Enter your Remote Control Access Code (3 digits
followed by ) after the beep.
3 Your machine signals the kinds of messages received:
1 long beeps – Fax message(s)
No beeps – no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset your machine when you finish.
6 Hang up.
R
EMOTE
C
ONTROL
A
CCESS
C
ARD
Retrieve a Fax
Press 9 6.
then to
Print a Memory Status List press
1, then enter the number of remote
fax machine, and then # #. After
the beep, hang up and wait.
Retrieve all faxes press 2, then
enter the number of remote fax
machine, and then # #. After the
beep, hang up and wait.
Erase all fax messages press 3.
Check Receiving Status
Press 9 7.
then for
Fax message, press 1.
Voice message , press 2.
1 long beeps – received messages
3 short beeps – no messages
Change Answer Mode
Press 9 8.
then for
TAD:MSG MGR, press 1.
FAX/TEL , press 2.
FAX ONLY , press 3.
Exit Remote Operation
Press 9 0.
Using Remote Access Code
1 Dial your fax machine phone number from a
touch tone phone.
2 Enter your Remote Control Access Code
(3 digits followed by ) after the beep.
3 The fax machine signals the kinds of
messages received:
1 long beep – Fax message(s)
2 long beeps – Voice message(s)
3 long beeps – Fax and Voice message(s)
No beeps – no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset the machine when you
finish.
6 Hang up.
M ESSAGE M ANAGER
R EMOTE C ONTROL A CCESS C ARD
(For FAX-T94)
(For FAX-T96)
1
1 4
5 6