Brother FAX-T94 - Manual (Page 156)

G - 3 GLOSSARY
Manual fax When you lift the handset or press Speaker Phone
(For FAX-T96 only) so you can hear the receiving fax machine
answer before you press
Fax Start to begin transmission.
Menu mode Programming mode for changing your machine’s
settings.
Next Fax Reservation Accepts the next document in the ADF for
transmission while the fax machine is still receiving.
One-Touch Keys on the fax machine control panel where you can
store numbers for easy dialling. You must use a separate key for
each number.
Out of Paper Reception Receives faxes into the fax machine’s
memory when the machine is out of paper.
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Paging Feature enables your fax machine to call your pager when
a fax is received into its memory (for FAX-T96 only).
Pause Allows you to place a 3.5 second delay in the dialling
sequence stored on Speed-Dial numbers.
Photo resolution A resolution setting that uses varying shades of
gray for the best representation of photographs.
Polling The process of a fax machine calling another fax machine
to retrieve waiting fax messages.
Pulse A form of rotary dialling on a telephone line.
Remote Access Code Your own four-digit code ( --- ) that allows
you to call and access the fax machine from a remote location.
Resolution The number of vertical and horizontal lines per inch.
See: Standard, Fine, Super Fine and Photo.
Ring Delay The number of rings before the fax machine answers in
FAX ONLY and FAX/TEL modes.
Search An electronic, alphabetical listing of stored One-Touch,
Speed-Dial and Group numbers.