Brother FAX-T94 - Manual (Page 77)

SETUP SEND 6 - 7
4
Press 1 if you want to select additional settings. The display
returns to the Setup Send menu.
—OR—
Press 2 if you are finished choosing settings, and go to Step 5.
The screen prompts you to enter the fax number you want to
call.
5
Enter the fax number you are calling, and press Fax Start .
Manual and automatic fax redial
If you are sending a fax manually and the line is busy, press
Redial/Pause , and then press Fax Start to try again. If you want
to make a second call to the last number dialled, you can save time
by pressing
Redial/Pause and Fax Start .
Redial/Pause only works if you dialled from the control panel.
If you are sending a fax automatically and the line is busy, the fax
machine will automatically redial three times at five minutes intervals.
Cancelling a job while scanning, dialling and
sending the document
You can cancel a job while you are scanning it into memory by
pressing
Stop/Exit .
You can also cancel a job while the fax machine is dialling or sending
the document by pressing
Stop/Exit .
If you want to copy a document using multiple resolutions, press
Copy/Reports in Step 5.