Brother FAX-T94 - Manual (Page 46)

4 - 6 INITIAL SETUP
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The
recall facility on the machine supports timed break recall only (TBR),
PABXs normally can work with this for gaining access to an outside
line, or for transferring a call to another extension: The feature works
when the
R key is pressed.
Setting PABX
If your machine is connected to a PABX system, set PBX:ON . If not,
set OFF .
1
Press Menu/Set , 1 , 5 .
2
Press or to select ON (or
OFF ).
3
Press Menu/Set .
4
Press Stop/Exit .
You can program an R keypress as part of a number stored in
a One-Touch or Speed-Dial location. When programming the
One-Touch or Speed-Dial number (Function menu 6-1 or 6-2)
press
R first (the screen displays “!”), then enter the telephone
number. If you do this, you do not need to press R each time
before you dial using a One-Touch or Speed-Dial location. (See
One-Touch dialling on page 6-1 and Speed-dialling on page
6-1.)
However, if PABX is set to OFF, you can’t use the One-Touch
or Speed-Dial number that an
R keypress is programmed into.
5.PBX