Brother FAX-T94 - Manual (Page 60)

5 - 12 SETUP RECEIVE
Changing Remote Codes
Remote Codes might not work with some telephone systems. The
preset Fax Receive Code is
5 1 . The preset Telephone Answer
Code is # 5 1. The preset Activation Voice Code is 8 1 .
To change Remote Codes
1
Press Menu/Set , 2 , 4 .
2
Press or to select ON (or OFF ), and press Menu/Set
when the screen displays the setting you want.
3
If you want to, enter a new Fax Receive Code, then press
Menu/Set .
4
If you want to, enter a new Telephone Answer Code, then press
Menu/Set .
5
If you want to, enter a new Activation Voice Code, then press
Menu/Set .
6
Press Stop/Exit to exit.
Printing a fax from the memory
(For FAX-T94 only)
If you set Fax Storage to ON for Remote Retrieval, you can still print
a fax from the memory when you are at the fax machine. (See Setting
Fax Storage on page 8-2.)
1
Press Menu/Set , 8 , 4 .
2
Press Fax Start .
3
After printing has finished.
4
Press Stop/Exit .
If you are always disconnected when accessing your external
TAD remotely, try changing the Fax Receive Code from
5 1
to # # # and the Telephone Answer Code from # 5 1 to 1 1 1 .
You cannot use the same number for the Fax Receive Code and
the Telephone Answer Code.
4.PRINT DOCUMENT