Out of memory message, Broadcasting, Out of memory message -19 broadcasting -19 – Brother FAX-T94 User Manual
Page 89
SETUP SEND 6 - 19
Out of memory message
If you get an
OUT OF MEMORY
message while scanning the first page
of a fax, press
Stop/Exit
to cancel the scan. If you get an
OUT OF
MEMORY
message while scanning a subsequent page, you will have
the option to press
Fax Start
to send the pages scanned so far, or
to press
Stop/Exit
to cancel the operation.
Broadcasting
Using the numbers you have stored in Groups, One-Touch and
Speed-Dial memory, you can “Broadcast” faxes automatically to a
maximum of 104 different locations in a few simple steps.
After the Broadcast is completed, a Broadcast Report will be printed
automatically to let you know the results.
1
Insert the document face down in the ADF.
2
Press
Menu/Set
,
3
,
9
.
3
To change the default setting, press
or
to select
ON
.
Press
Menu/Set
.
4
Enter the One-Touch and Speed-Dial numbers (one after the
other), Search numbers or a Group number you have stored.
5
Press
Fax Start
. The fax machine stores the document in
memory, and then transmits it to all the numbers you entered. If
the line is busy, your machine will redial.
Depending on your typical faxes,
OUT OF MEMORY
errors can
occur frequently. If this happens, change the Memory
Transmission setting back to
OFF
.
Press
Stop/Exit
during transmission to cancel the current fax
Broadcast.
To cancel all locations, press
Menu/Set
,
4