Brother FAX-T94 - Manual (Page 126)

9 - 17 MESSAGE MANAGER
96 Retrieve Fax Enter the number of a remote fax machine to
receive a report or stored fax messages. (See
Retrieving the Memory Status List on page 9-18
and Retrieving Fax Messages on page 9-18.)
1 Memory Status
List
2 Retrieve all FAX
3 Erase FAX in
the memory
If you hear one long beep, you can erase the fax
message from the memory.
97 Check the receiving
status
You can check whether your fax machine has
received any Document or Voice messages. If yes,
you will hear one long beep. If no, you will hear
three short beeps.
1 Document
2 Voice
98 Change Answer Mode If you hear one long beep, you can change the
answer mode. If you hear three short beeps, you
cannot change it. (Example: There is no TAD MSG
when you want to change to TAD mode.)
1 TAD
2 FAX/TEL
3 FAX
90 Exit After a long beep, you can exit remote control.
Remote control commands Detail Operation