beautypg.com

Setting the new default, How to set a new default for scan to e-mail, E-mail server, for mfc-9970cdw) – Brother MFC 9970CDW User Manual

Page 255

background image

Network Scanning

248

13

How to set a new default for Scan to E-mail
(E-mail Server, For MFC-9970CDW)

13

You can set your own default settings.

Setting the new default

13

a

Press

(SCAN).

b

Press Scan to E-mail.

c

Enter the destination E-mail address.
Do one of the following:

To enter the E-mail address manually, press Manual and go to step d.

If you have stored the E-mail address to the machine’s address book, press Address Book and go
to step e.

Note

If your network supports the LDAP protocol, you can search for E-mail addresses on your server. (For
information on how to configure LDAP protocol, see the Network User's Guide.)

d

Enter the E-mail address.

Press

to choose numbers, letters or special characters.

Press OK and go to step f. (For information on how to enter text, see the Basic User's Guide.)

e

Press a or b to choose the E-mail address.
You can also use the following search option.

Press

to search by alphabetical order or numerical order.

Press OK and go to step f. (For more information on using the Address Book, see the Basic User's
Guide
.)

f

Press and choose your new setting. Repeat this step for each setting you want to change.

g

After changing the last setting, press d or c to display Set New Default. Press Set New Default.

h

Press Yes to confirm.

i

Press Stop/Exit.

This manual is related to the following products: