For touchscreen models – Brother MFC 9970CDW User Manual
Page 253

Network Scanning
246
13
For Touchscreen models
13
a
Load your document.
b
Press
(SCAN).
c
Press Scan to Network.
d
Press a or b to choose one of the profiles listed.
e
If you check Use PIN for authentication in FTP/Network Scan Profile of Web Based Management, the
LCD will prompts you to enter a PIN number. Enter the 4-digit PIN number and then press OK.
If the profile is complete, you will automatically go to step l.
If the profile is not complete, for instance, the quality or file type are not chosen, you will be prompted
to enter any missing information in the following steps.
f
Choose one of the options below:
Press d or c to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi
, Gray 200 dpi or Gray 300 dpi. Go to step g.
Press d or c to choose B&W 200 dpi or B&W 200x100 dpi. Go to step h.
g
Press to choose PDF, PDF/A, Secure PDF, Signed PDF, JPEG or XPS.
Go to step i.
h
Press to choose PDF, PDF/A, Secure PDF, Signed PDF, or TIFF. Go to step i.
Note
• If you chose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 0-9 before
it starts scanning.
• If you choose Signed PDF, you must install and then configure a certificate to your machine using Web
Based Management.