Brother MFC-J410W - Manual (Page 95)

Network printing from Windows ® basic TCP/IP Peer-to-Peer printing
88
7
Printer driver already installed
7
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a (Windows ® 7)
Click the button, Control Panel, Hardware and Sound, and then Device and Printers.
(Windows Vista
®
)
Click the button, Control Panel, Hardware and Sound, and then Printers.
(Windows Server ® 2008)
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
(Windows
®
XP and Windows Server
®
2003)
Click the Start button and choose Printers and Faxes.
(Windows
®
2000)
Click the Start button and choose Settings and then Printers.
b (Windows
®
7)
Choose the printer driver you wish to configure, and then click Print server properties from the menu.
(Other Windows
®
Operating Systems)
Right click on the printer driver you wish to configure, and then choose Properties.
c Click the Ports tab and click Add Port.
d Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e (Windows
®
7)
The Add Standard TCP/IP Printer Port Wizard will start.
(Other Windows
®
Operating Systems)
The Standard TCP/IP Port Wizard will start.
f
Enter the IP address of your network printer. Click Next.
g Click Finish.
h (Windows
®
7)
Close Printer Ports and Printer Server Properties dialog box.
(Other Windows
®
Operating Systems)
Close Printer Ports and Properties dialog box.