Brother MFC-J410W - Manual (Page 78)

Control panel setup
71
5
DNS Server
5
Primary DNS Server IP Address
5
This field specifies the IP address of the primary DNS (Domain Name System) server.
Secondary DNS Server IP Address
5
This field specifies the IP address of the secondary DNS server. It is used as a backup to the Primary DNS
server address. If the Primary server is unavailable, the machine will contact the Secondary DNS server.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c For DCP-J715W, MFC-J615W and MFC-J630W
(For Wired) Press a or b to choose Wired LAN, and press OK.
(For Wireless) Press a or b to choose WLAN, and press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose DNS Server.
Press OK.
f Press a or b to choose Primary or Secondary.
Press OK.
g Enter the DNS Server address.
(For MFC models) Press OK.
(For DCP models) Press a, b, d or c to select
, and press OK.
Note
For DCP models
To enter the number, press a, b, d or c to select a number displayed on the LCD. Then press OK. Repeat
this step until you have entered all the numbers.
h Press Stop/Exit.
APIPA
5
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the
BOOT Method you have set (see BOOT Method on page 65). Choosing Off means the IP address doesn’t
change, when the print server cannot obtain an IP address through the BOOT Method you have set.
a Press Menu.
b Press a or b to choose Network.
Press OK.
OK OK