Brother MFC-J410W - Manual (Page 118)

Appendix B
111
B
 The factory settings are shown in bold.
1 On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
Network
(Continued) WLAN
(Continued) TCP/IP
(Continued) Node Name BRWXXXXXXXXXXXX= (your machine’s
Ethernet address)
(up to 15 characters)
WINS Config Auto/Static
WINS Server Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
DNS Server Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
APIPA On/Off
Setup Wizard — (Choose SSID from list or manually add
SSID)
WPS/AOSS —
WPS w/PIN Code —
WLAN Status Status
Active(11b)/Active(11g)/
Connection Fail/Confirm I/F/AOSS
Active
Signal Signal:Strong/Signal:Medium/
Signal:Weak/Signal:None
SSID (Shows SSID with up to 32 digits)
Comm. Mode Ad-hoc/Infrastructure
MAC Address
Network I/F Wired LAN/WLAN
Network Reset
Level1 Level2 Level3 Options1 Options2