Brother MFC-J410W - Manual (Page 55)

Wireless configuration using the Brother installer application
48
4
Configuration using WPS or AOSS™ from the control panel
menu (Automatic wireless mode)
4
Before configuring the wireless settings
4
IMPORTANT
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again.
Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.
Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically.
• If you are using Windows
®
Firewall or a firewall function of anti-spyware or antivirus applications, disable
all personal firewall software (other than Windows
®
Firewall), anti-spyware or antivirus applications for the
duration of the configuration. Once you are sure that you can print, configure the software settings
following the instructions again.
Configure the wireless settings
4
a
(For DCP-J315W, DCP-J515W, MFC-J265W, MFC-J270W, MFC-J410W and MFC-J415W)
Press Menu.
Press a or b to choose Network, press OK.
Press a or b to choose WLAN Enable, press OK.
Press a or b to choose On, press OK.
(For DCP-J715W, MFC-J615W and MFC-J630W)
Press Menu.
Press a or b to choose Network, press OK.
Press a or b to choose Network I/F, press OK.
Press a or b to choose WLAN, press OK.
b Turn on your computer.
Close any applications running before you start configuration.