Brother MFC-J410W - Manual (Page 33)

Configuring your machine for a wireless network
26
3
Configuration using the Brother installer application on the installation
CD-ROM to configure your wireless network machine
3
You can also use the Brother installer application on the installation CD-ROM we have provided with the
machine. You will be guided by the on-screen instructions until you are able to use your Brother wireless
network machine. You must know your wireless network settings before you proceed with this
installation. (See Wireless configuration using the Brother installer application on page 37.)
Configuration temporarily using a USB or a network cable
3
You can temporarily use a USB cable or a network cable when you configure your Brother machine in this
method. The USB and network cables are not standard accessories included with the machine.
 You can remotely configure the machine from the computer on the network using a USB cable (A)
1
.
1 Connecting a USB cable is available to either the wired computer or the wireless computer.
 If there is an Ethernet Hub or Router in the same network as the wireless access point/router (A) of your
machine, you can temporarily connect the Hub or Router to the machine using a network cable (B). You
can then remotely configure the machine from a computer on the network.
A
B
A