beautypg.com

9 troubleshooting, Overview, Troubleshooting – Brother MFC-J410W User Manual

Page 101

background image

94

9

9

Overview

9

This chapter explains how to resolve typical network problems you may encounter when using the machine.
If, after reading this chapter, you are unable to resolve your problem, please visit the Brother Solutions Center
at: http://solutions.brother.com/

Go to the page for your solution from the lists below:

9

I cannot complete the wireless network setup configuration. (See page 94.)

The machine is not found on the network during the MFL-Pro Suite installation. (See page 95.)

The machine cannot print or scan over the network. (See page 96.)

The machine is not found on the network even after successful installation. (See page 96.)

I'm using security software. (See page 98.)

I want to check my network devices are working properly. (See page 99.)

Troubleshooting

9

Make sure that the following items are configured before reading this chapter.

First check the following:
The power cord is connected properly and the machine is turned on.
The access point, router or hub are turned on and its link light is blinking.
All protective packaging has been removed from the machine.
The ink cartridges are installed properly.
The front and back covers are fully closed.
Paper is inserted properly in the paper tray.
(For wired networks) A network cable is securely connected to the machine and the router or hub.

I cannot complete the wireless network setup configuration.

Question

Interface Solution

Is your SSID correct?

wireless

Reconfirm and choose the correct SSID.

• The default SSID may be provided on a label attached to the wireless

access point/router. Or the manufacturer's name or model no. of the
wireless access point/router may be used as the default SSID.

• See the instructions supplied with your wireless access point/router

for information on how to find the SSID.

• Ask the manufacturer of your wireless access point/router or ask to

your Internet provider or network administrator.

For information on what the SSID is, see SSID (Service Set Identifier)
and channels
on page 19.

This manual is related to the following products: