Brother MFC-J410W - Manual (Page 52)

Wireless configuration using the Brother installer application
45
4
n
(For LAN cable users)
A wireless LAN report will automatically be printed. Choose the status as it is shown for the Connection
on the wireless LAN report. Click Next.
If your status is "Connection:OK", go to step p.
If your status is "Connection:Failed", go to step o.
o
(For LAN cable users)
Click Finish. Wireless setup failed as it was unable to associate with a wireless network. Check the error
code on the printed wireless LAN report and refer to Troubleshooting in the Quick Setup Guide. Then try
starting from step b-3 again.