Brother MFC-J410W - Manual (Page 116)

Appendix B
109
B
Function table and default factory settings
B
For DCP-J315W, DCP-J515W, MFC-J265W, MFC-J270W, MFC-J410W and MFC-J415W
B
Level1 Level2 Level3 Options
Network TCP/IP BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
1
Subnet Mask [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
1
Gateway [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
Node Name BRWxxxxxxxxxxxx= (your machine’s Ethernet
address)
(up to 15 characters)
WINS Config Auto/Static
WINS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
DNS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
APIPA On/Off
Setup Wizard — (Choose SSID from list or manually add SSID)
WPS/AOSS —
WPS w/PIN Code —
WLAN Status Status Active(11b)/Active(11g)/
Connection Fail/Confirm I/F/AOSS Active
Signal Signal:Strong/Signal:Medium/Signal:Weak/
Signal:None
SSID (Shows SSID with up to 32 digits)
Comm. Mode Ad-hoc/Infrastructure
MAC Address
WLAN Enable
On/Off
Network Reset