Brother MFC-J410W - Manual (Page 23)

Configuring your machine for a network with an Ethernet cable connection (DCP-J715W, MFC-J615W and MFC-J630W only)
16
2
a
Start the BRAdmin Professional 3 utility (from Windows
®
2000/XP, Windows Vista
®
, Windows
®
7 and
Windows Server
®
2003/2008), by clicking Start / All Programs
1
/ Brother Administrator Utilities /
Brother BRAdmin Professional 3 / BRAdmin Professional3.
1 Programs for Windows ® 2000 users
b
Choose the print server/machine which you want to configure.
c
Choose Configure Device from the Control menu.
d
Enter a password if you have set one.
Note
By default, no password is required. To set a password for, double-click the device you want to set a
password. Click Control tab, and then click Change Password. Enter the new password.
e
You can now change the wireless settings.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional 3 utility screen.
• You can find the Node Name and MAC Address (Ethernet Address) from the machine’s control panel.
See Node Name on page 68 and MAC Address on page 75.