Brother MFC-J410W - Manual (Page 36)

Configuring your machine for a wireless network
29
3
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the installation CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX in the
installation CD-ROM.
Configuring your machine when the SSID is not broadcast
3
a Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
1 TKIP is supported for WPA-PSK only.
For example:
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b Press Menu.
Network name:(SSID, ESSID)
Communication Mode Authentication method Encryption mode Network key
Infrastructure Open system WEP
NONE
—
Shared key WEP
WPA/WPA2-PSK AES
TKIP
1
Ad-hoc Open system WEP
NONE
—
Network name:(SSID, ESSID)
HELLO
Communication Mode Authentication method Encryption mode Network key
Infrastructure WPA2-PSK AES 12345678