Brother MFC-J410W - Manual (Page 112)

Appendix A
105
A
Installation when using Web Services (Windows Vista
®
and
Windows
®
7)
A
Note
• You must configure the IP address on your machine before you proceed with this section. If you have not
configured the IP address, see Configuring your machine for a network with an Ethernet cable connection
(DCP-J715W, MFC-J615W and MFC-J630W only) on page 9 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• Only printer support is installed with Web Services.
a
Insert the installation CD-ROM.
b
Choose your CD-ROM drive/install/driver/gdi/32 or 64.
c
Choose your language and then double-click DPInst.exe.
d (Windows Vista
®
)
Click , then choose Network.
(Windows
®
7)
Click , Control Panel, Network and Internet, and then View network computers and devices.
e The machine’s Web Services Name will be shown with the printer icon. Right click the machine you want
to install.
Note
The Web Services Name for the Brother machine is your model name and the MAC Address (Ethernet
Address) of your machine (e.g. Brother MFC-XXXX [XXXXXXXXXXXX]).
f From the pull down menu, click Install.